NBS Clause J10-340
J10 CEMENTITIOUS MORTAR TANKING/DAMP PROOFING
To be read with Preliminaries / General conditions.
340 SEALANTS
Vandex Construction Joint Tape
Vandex Construction Joint Tape bridges and seals construction joints and cracks in concrete structures. Vandex Construction Joint Tape is a synthetic rubber strip, approximately 0.7mm thick. It is covered on both sides with an alkali-resistant and flexible polyester fabric mat, which forms a web on the edges.
The properties of the fabric mat and synthetic rubber combine to ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
Areas of Application:
Vandex Construction Joint Tape, in combination with Vandex BB 75 E flexible waterproofing slurry, forms a durable seal of construction joints and cracks, in damp concrete conditions.
Areas of application: construction joints and cracks.
Vandex Construction Joint Tape is resistant to hydrostatic pressure:
- on the positive side
- on the negative side only with appropriate support
Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
340 SEALANTS
Manufacturer: Safeguard Europe Ltd. Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204. Fax: 01403 217529. Email: info@safeguardeurope.com Web: www.safeguardeurope.com
Product reference: Vandex Construction Joint Tape System
Colour: Grey
Application:
Preparation: The substrate must be sound, open textured, clean and free of oil and grease. Irregularities and surface voids must be made good.
Initial coat: Vandex BB 75 E
Thickness: 1.5 mm
Joint Tape: Place the Vandex Construction Joint Tape on initial coat and embed both fabric edges in Vandex BB 75 E mix.
Final coat: Overcoat joint tape with Vandex BB 75 E
Thickness: 1.5 mm
For a full listing of NBS clauses for our products and conditions of use, please visit our NBS menu page. |
Vandex Flextape System
