NBS Clause E41-510
E41 WORKED FINISHES TO IN SITU CONCRETE
To be read with Preliminaries / General conditions. 310 SURFACE HARDENER
Vandex Mineralit
A ready-to-use liquid for structural solidification, based on silicates, for use on concrete or cementitious surfaces.
Vandex Mineralit produces through a physio-chemical process an improvement in the surface structure of cementitious building materials. The crystallization resulting from the high silicic acid content produces compounds which improve the strength and density of substrates.
The substrate must be clean and free of any contamination and weak material. The substrate must be dry at the time of application. Apply Vandex Mineralit in one to two coats, by brush or low pressure spray.
Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
310 SURFACE HARDENER
Manufacturer: Safeguard Europe Ltd. Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204. Fax: 01403 217529. Email: info@safeguardeurope.com Web: www.safeguardeurope.com
Product reference: Vandex Mineralit
Preparation: Clean cured concrete to remove dirt, grease, oil and other surface contaminants.
Application: Evenly to dry surfaces. After absorption, wash surface immediately with clean water.
Solutions and wash water: Do not discharge to drains. Store and dispose of safely.
For a full listing of NBS clauses for our products and conditions of use, please visit our NBS menu page.
|
