NBS Clause J30-110
J30 LIQUID APPLIED TANKING/ DAMP PROOFING
To be read with Preliminaries / General conditions.
130 COLD APPLIED DAMP PROOFING
DryBase Vapour Membrane
DryBase Vapour Membrane is a single-pack waterproofing system that is supplied ready to use. The product is supplied as a black or white liquid, which, once applied cures to form a membrane that is flexible, elastic, and resistant to abrasion and UV light. DryBase Vapour Membrane is water-based and safe to apply onto damp surfaces by brush, roller or spray. Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
130 COLD APPLIED DAMP PROOFING
Substrate: Insert requirements
Primer: No priming required
Preparation: All contact surfaces must be sound, clean and smooth with a trowelled or brushed finish. Any masonry should be flush pointed and defects in existing surfaces made good. Remove any laitance, dust, loose material or surface water.
Coating material:
Manufacturer: Safeguard Europe Ltd. Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204. Fax: 01403 217529. Email: info@safeguardeurope.com Web: www.safeguardeurope.com
Product reference: DryBase Vapour Membrane
Number of coats: Two coats minimum
Coverage per coat (minimum): 1.1 litres/m² applied in two coats of 0.55 litres/m², to achieve a minimum wet film thickness of 1.1mm (dry film thickness 0.6mm)
Reinforcement: No reinforcement required
Blinding: Consult Safeguard Europe Ltd technical literature for details.
Safeguard ECS Epoxy Floor Coating
ECS Epoxy Floor Coating is a two-part water-dispersed epoxy resin product consisting of a pigmented base resin component and a water-dispersed hardener component. The product is available in white and clear versions. ECS Epoxy Floor Coating can be applied by brush or lambs wool roller to provide a decorative coating which is easily cleaned. The applied coating will protect concrete and is resistant to the penetration of oils and greases.
Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
130 COLD APPLIED DAMP PROOFING
Substrate: Insert requirements
Primer:
Preparation: All contact surfaces must be sound, clean dry and provide a ‘light’ mechanical key. Remove all loose material, paint, plaster and oily deposits.
Coating material:
Manufacturer: Safeguard Europe Ltd. Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL. Tel: 01403 210204. Fax: 01403 217529. Email: info@safeguardeurope.com Web: www.safeguardeurope.com
Product reference: Safeguard ECS Epoxy Floor Coating
Number of coats:
Finishing coats: Two
Type: Two-part water-dispersed epoxy resin
Colour: White / Clear
Coverage per coat (minimum): Consult Safeguard Europe Ltd technical literature for details.
Reinforcement: No reinforcement required
Blinding: Consult Safeguard Europe Ltd technical literature for details.
For a full listing of NBS clauses for our products and conditions of use, please visit our NBS menu page.
|
DryBase Vapour Membrane 
