l-blue
Ask us a question...
Telephone +44 (0) 1403 210204 Safeguard - Making Buildings Dry

DryBase Liquid Applied DPM

Drybase packDryBase Liquid-Applied DPM (previously known as DryBase Vapour Membrane) is a single-pack barrier coating that is supplied ready to use straight from the tub or pail. The product is supplied in black or white with a consistency similar to that of thick emulsion paint.

Once applied, the product cures to form a membrane that is flexible and elastic. DryBase Liquid-Applied DPM is water-based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.

Once cured Drybase Liquid-Applied DPM provides a barrier to damp and ground gases (including radon, carbon dioxide, and methane).

Each 5 litre pack will cover up to 4.5m2 depending on the substrate surface texture.

Typical applications for DryBase Liquid-Applied DPM include:

Protecting embedded timbers   DPC below floor screed
     
DPC reglet joint   DPC below wooden floor

NBS clauses NBS Clauses

Suggested NBS specification clause: J30-130

Visit our NBS page for further information on specifying Safeguard products using NBS.

aBrush application to wall
DryBase Vapour Membrane (Black) to wall
 
aRoller application to floor
DryBase Vapour Membrane (White) to floor
 
aDrybase under wooden floor
Damp proof membrane (DPM) under wooden floor
 
Vandex
odlroyd
Stormdry
Dryzone

Safeguard Europe Limited provides information on this web site for your personal use. Access and use of the information is subject to the terms and conditions displayed on the site and all applicable laws. By accessing, and using information on, this web site, you accept and agree to be bound by these terms and conditions. We strongly recommend that you contact us directly for further help and guidance on all aspects of our products and services.

©Safeguard Europe Limited, Horsham, West Sussex, UK, RH13 5QL. All Rights Reserved. Registered in England and Wales. Company Number 1721203.

[Site Map]