l-blue
Ask us a question...
Telephone +44 (0) 1403 210204 Safeguard - Making Buildings Dry

Vandex BB75 Waterproofing Slurry

Vandex BB75 is a cementitious waterproofing slurry (tanking slurry) with hydrophobic properties, resistant to water and moisture.

Vandex BB75 is applied by trowel or spray to surfaces such as concrete, masonry, and render, which have to be sealed and protected against the influence of water and moisture. Typical areas of application include:

Once cured, Vandex BB75 tanking slurry forms a waterproof coating (tested up to 7 bar). It can be employed against active and passive water pressures, and is approved for use in contact with potable water. The initial and final bonding capability of Vandex BB75 is excellent, making it suitable for application to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat afer setting, whilst remaining vapour-permeable. The properties of Vandex BB75 can be further enhanced by using the "Vandex PK75" or "Vandex Cemelast Liquid" polymers as a gauging solution - the resulting products being referred to as Vandex BB75 E and Vandex Cemelast.

Vandex BB75 is not intended to provide a decorative finish. In most cases, the Vandex BB75 waterproofing layer is covered with a suitable plaster such as Vandex Refurbishment Plaster.

Video

The video below demonstrates how Vandex BB75 can be applied by trowel:

Vandex BB White

Vandex BB White is a version of Vandex BB75 based on white Portland cement. Its characteristic white colour makes it particularly suitable for use on exposed surfaces, e.g. potable water reservoirs.

Vandex BB75 Z

Vandex BB75 Z is formulated to have enhanced sulphate resistance, making it suitable for use in sewage treatment plants and sewer / manhole refurbishment projects.

BBA certified BBA Approved

Vandex BB75 is covered by BBA certificate number 90/2516.

Other Approvals

Vandex BB75 is CE marked in compliance with EN1504-2. It is approved under WRAS in the UK for use in drinking water structures.

NBS clauses NBS Clauses

Suggested NBS specification clauses: J10-110, J30-110

Visit our NBS page for further information on specifying Safeguard products using NBS.

 

Trowel Application of BB75
Vandex BB75 tanking slurry applied by trowel.
 
Spray Application
Spray Application of Vandex BB75
Vandex
odlroyd
Stormdry
Dryzone

Safeguard Europe Limited provides information on this web site for your personal use. Access and use of the information is subject to the terms and conditions displayed on the site and all applicable laws. By accessing, and using information on, this web site, you accept and agree to be bound by these terms and conditions. We strongly recommend that you contact us directly for further help and guidance on all aspects of our products and services.

©Safeguard Europe Limited, Horsham, West Sussex, UK, RH13 5QL. All Rights Reserved. Registered in England and Wales. Company Number 1721203.

[Site Map]