l-blue
Ask us a question...
Telephone +44 (0) 1403 210204 Safeguard - Making Buildings Dry

BrickFix DriveTie Helical Wall Ties

BrickFix DriveTie helical wall ties provide a simple and fast method of installing wall ties into existing cavity walls - e.g. where the original wall ties have corroded or were installed incorrectly.

They are manufactured from 304 grade stainless steel bar (316 grade available on request) and are driven into masonry using a special drill attachment.

BrickFix DriveTie helical wall ties are available in various lengths to accommodate different cavity widths.

Wall Tie Installation

DriveTie helical wall ties are installed using a special fixing tool that attaches to an SDS drill as shown in the diagrams below:

1. Drill the pilot holes through both leaves to
required depth and diameter.
2. Insert the installation tool into an SDS rotary hammer drill, then place the tie into the installation tool.
   
3. Drive the tie into the internal leaf to the required
depth ensuring the tie is fully recessed to the
external leaf below the face of the masonry.
4. Make good the tie at the surface with Colour Pointing Mortar.

All BrickFix wall ties should be installed in accordance with the advice given in BRE Digest 329 and BRE Digest 401. If you would like to discuss a wall tie replacement project, please contact our technical department.

Related Pages

RIBA-Approved CPD Seminars

Safeguard currently offer the following RIBA-Approved CPD Seminars free-of-charge to architects and specifiers on the UK mainland:

aDriveTie Installation
DriveTie wall tie installation
 
aBrickFix DriveTies
DriveTie helical wall ties
 
Download Datasheets
Crack Stitching Helical wall tie Helical wall tie fixing tool
BrickFix Crack Stitching (1.4Mb) BrickFix Drivetie Helical Wall Tie (1.2Mb) BrickFix Drivetie Fixing Tool (1.6Mb)
Neoprene mechanical wall tie Resin remedial wall tie Price List
BrickFix Neoprene Mechanical Wall Tie - Quickfix (172k) BrickFix Resin-Resin Wall Tie (1.3Mb) Price List & Order Form (85k)
Adobe Acrobat Reader is required to view these datasheets (available free from the Adobe website.) p
[Click Here] to request a copy of any of these publications by post.

Technical Support

The following technical support features are available through this website:

To speak to a member of our technical team call 01403 210204 during office hours.
Vandex
odlroyd
Stormdry
Dryzone

Safeguard Europe Limited provides information on this web site for your personal use. Access and use of the information is subject to the terms and conditions displayed on the site and all applicable laws. By accessing, and using information on, this web site, you accept and agree to be bound by these terms and conditions. We strongly recommend that you contact us directly for further help and guidance on all aspects of our products and services.

©Safeguard Europe Limited, Horsham, West Sussex, UK, RH13 5QL. All Rights Reserved. Registered in England and Wales. Company Number 1721203.

[Site Map]