|Standards & Accreditations
Dampcheck Plus is a hybrid, silicone-based DPC injection fluid which, when injected into masonry forms a chemical DPC. Dampcheck Plus utilizes novel silane technology, which results in a high performance, low-odour injection fluid.
Dampcheck Plus has a multi-component formulation which means that it develops initial water-repellency quickly, but also allows further diffusion to form a more evenly distributed DPC. Further advantages include:
- BBA-approved (Certificate No. 97/3363)
- Ready for use (No mixing required)
- Enhanced spread characteristics
- Faster injection times than conventional DPC fluids
Despite these advantages, Dampcheck Plus has now been largely superseded by Dryzone Damp-Proofing Cream which is faster to install and does not require an electric DPC pump.
As with all remedial damp-proofing systems, it will be necessary to remove and replace any salt-contaminated plaster. A 3:1 sand-cement render incorporating Renderguard Gold is usually used for this purpose. Where the use of a hard sand/cement render is not desirable, another option is to cover the wall using Oldroyd Xp Plaster Membrane. This allows a wider range of plasters to be used.
|Clear, odourless liquid
|Size(s) & Packaging
|25 litre jerry cans
|4½″ thick wall
|Inject 1.3 litres per metre run of wall
|9″ thick wall
|Inject 2.6 litres per metre run of wall
|For thicker walls, multiply these figures accordingly
|Store above 5°C. Store out of direct sunlight